Wire wound Fuse Resistors FKN Features: 1.Good heat durability, low temperature coefficient, low noise, high load and power, nonflammability.Can be fusible during the stated time for protecting the circuit once working at the required overload voltage. 2.Operating ambient temperature :-55°C~+275°C 3.The surface is gray white nonflammable coating and indicate a white ring at the behind of the precision color ring. 4.Resistance tolerance:±5%,±10%.
Wire wound Fuse Resistors FKN
Products | Wire wound Fuse Resistors FKN | |||||||||||||
Features | 1.Good heat durability, low temperature coefficient, low noise, high load and power, nonflammability.Can be fusible during the stated time for protecting the circuit once working at the required overload voltage. 2.Operating ambient temperature :-55°C~+275°C 3.The surface is gray white nonflammable coating and indicate a white ring at the behind of the precision color ring. 4.Resistance tolerance:±5%,±10%. | |||||||||||||
Dimensions and Voltage Performance. | ||||||||||||||
Part No. | Power | Resistance tolerance | Dimensions | Max. working | Max. overload voltage | Max. insulation | ||||||||
L±1 | D±0.5 | d±0.05 | ||||||||||||
FKN012 | 1/2W | 0R~10R | 9.0 | 3.2 | 0.58 | 150V | 400V | 250V | ||||||
FKN01B | 1W | 0R~15R | 9.0 | 3.2 | 0.75 | 150V | 400V | 250V | ||||||
FKN02B | 2W | 0R~15R | 11.0 | 4.5 | 0.75 | 150V | 400V | 350V | ||||||
FKN03B | 3W | 0R~22R | 15.0 | 5.0 | 0.75 | 350V | 500V | 500V | ||||||
FKN04B | 4W | 0R1~22R | 17.0 | 6.0 | 0.75 | 350V | 600V | 500V | ||||||
FKN05B | 5W | 0R1~27R | 17.0 | 6.0 | 0.75 | 350V | 600V | 500V | ||||||
FKN06B | 6W | 0R1~33R | 25.0 | 8.0 | 0.75 | 500V | 600V | 750V | ||||||
FKN07B | 7W | 0R1~47R | 31.0 | 8.0 | 0.75 | 500V | 600V | 750V | ||||||
FKN08B | 8W | 0R1~56R | 41.0 | 8.0 | 0.75 | 500V | 600V | 750V | ||||||
FKN010B | 10W | 0R1~56R | 52.0 | 8.0 | 0.75 | 750V | 800V | 1000V | ||||||
Fusing Characteristics: | ||||||||||||||
Fusing Spec. | Multiple Rate Power | Rated resistance range | ||||||||||||
<2R | 2~10R | >10R | ||||||||||||
Fusing time (s) | ||||||||||||||
G | 12 | - | 60 | 30 | ||||||||||
B | 16 | 60 | 30 | 15 | ||||||||||
C | 25 | 30 | 15 | 7.5 | ||||||||||
J | 25 |
|
|
| ||||||||||
Test Item | Test Condition | Performance | ||||||||||||
Temperature Coefficient | The resistance value at normal temperature and normal temperature added 100°C, calculate per °C resistance value change rate. | ±300ppm/°C | ||||||||||||
Short Time overload | 10×rated voltage or Max. overload voltage(get the lower) for 5 seconds. |
R≤±(1%R0+0.05Ω) | ||||||||||||
Pulse overload | At 4×rated voltage or Max. pulse overload voltage(get the lower)cycle 10000±200times(1second on,25 seconds off). |
R≤±(1%R0+0.05Ω) | ||||||||||||
Resistance to soldering Heat | Immerge into the 350±10°C tin stove for 2~3seconds. | R≤±(1% R0+0.05Ω) | ||||||||||||
Solderability | Immerge into the 245±3°C tin stove for 2~3seconds. | The soldering area is over 95%. | ||||||||||||
Temperature cycling | At -55°C for 30 min. ,then at+25°C for 10~15°C,then at +125°C for 30 min., then at +25°C for 10~15 min., total 5cycles. |
R≤±(1% R0+0.05Ω) | ||||||||||||
Load life in humidity | Overload rated voltage or Max. working voltage(get the lower) for 1000 hours(1.5hours on and 0.5 hours off) at the 40±2°C and 90~95% relative humidity. |
R≤±(5% R0+0.05Ω) | ||||||||||||
Load life in heat | Overload rated voltage or Max. working voltage(get the lower) for 1000 hours(1.5hours on and 0.5 hours off) at the 70±2°C. |
R≤±(5% R0+0.05Ω) | ||||||||||||
Nonflammability | Respectively load AC voltage by 5,10,16 times rated power for 5 minutes . | No visible flame. | ||||||||||||
Note: We can according customer’s requirements to customize the other fusing characteristics resistors . |
Rated Power Derating Curve of Wire wound Fuse Resistors FKN:
Fusing Curve of Wire wound Fuse Resistors FKN: