Cement type resistors SQM Features: 1.Good heat-durability, low temperature coefficient, low noise, high load power, high insulating capacity. 2.Operating ambient temperature:-55℃~+275℃ 3.Resistance tolerance: ±1%,±2%,±5%,±10%.
Cement Type Resistors SQM
Products |
Cement Type Resistors SQM |
|||||||||||||||||||||
Features |
1.Good heat-durability, low temperature coefficient, low noise, high load power, high insulating capacity. |
|||||||||||||||||||||
Specifications |
||||||||||||||||||||||
Part NO. |
Dimensions |
Resistance range |
||||||||||||||||||||
W± 1 |
D± 1 |
H± 1.5 |
L± 1 |
P± 1 |
d± 0.05 |
KN |
MO |
|||||||||||||||
2W |
11 |
7 |
20.5 |
4 |
4 |
0.8 |
0.1~270 |
271~10K |
||||||||||||||
3W |
12 |
8 |
25 |
4 |
4 |
0.8 |
0.1~1K |
1K1~50K |
||||||||||||||
5W |
13 |
10 |
25.5 |
4 |
4 |
0.8 |
0.1~1K |
1K1~50K |
||||||||||||||
7W |
13 |
10 |
39 |
4 |
4 |
0.8 |
0.1~1K |
1K1~47K |
||||||||||||||
10W |
13 |
10 |
51 |
4 |
4 |
0.8 |
0.1~1K |
1K1~47K |
||||||||||||||
Power rated |
2W |
3W |
5W |
7W |
10W |
|||||||||||||||||
Max. working voltage |
150V |
350V |
350V |
500V |
750V |
|||||||||||||||||
Dielectric withstanding voltage |
1000V |
1000V |
1000V |
1000V |
1000V |
|||||||||||||||||
Resistance tolerance |
J ± 5% |
J ± 5% |
J ± 5% |
J ± 5% |
J ± 5% |
|||||||||||||||||
Cement Type Resistor (wire wound) |
||||||||||||||||||||||
Characteristics |
Specifications |
Test Method |
||||||||||||||||||||
DC Resistance |
J ± 5% |
AT 25℃ |
||||||||||||||||||||
Dielectric withstanding voltage |
No evidence of flashover mechanical amage, arcing or insulation breakdown. |
Resistance shall be clamped with a conductive material which conforms to resistors surface so that 90o of the outer periphery is contacted a potential of 1000V AC shall be applied for 60 seconds. |
||||||||||||||||||||
Insulation Resistance |
1000MΩ MIN |
Withstanding test and shall be measured at DC 500V. Resistor shall be prepared AC same method of dielectric. |
||||||||||||||||||||
Thermal Shock |
ΔR≤±(2%R0+0.1Ω) |
After application of rated power for 30 minutes, 30 minutes exposure to -30±5℃ ambient temperature. |
||||||||||||||||||||
Humidity |
ΔR≤±(2%R0+0.1Ω) |
Temperature resistance change after 1000 hours exposure in a humidity test chamber controlled at 40±2℃ and 90~95% relative humidity. |
||||||||||||||||||||
Cement Typr Resistor (metal oxide film) |
||||||||||||||||||||||
Short time overload |
ΔR≤±(2%R0+0.05Ω) |
Temperature resistance change after the application of a potential of 2.5 times RCVW for 5 seconds. |
||||||||||||||||||||
Load Life |
ΔR≤±(5%R0+0.1Ω) |
Permanent resistance change after 1000 hours operating at RCWV, with duty cycle of 1.5 hours on and 0.5 hours off at 25℃±2℃. |
||||||||||||||||||||
Load Life in Humidity |
ΔR≤±(5%R0+0.1Ω) |
Temperature resistance change after 1000 hours(1.5hours on and 0.5 hours off) at RCVW in a humidity chamber controlled at 40±2℃ and 90~95% relative humidity. |
||||||||||||||||||||
Solderability |
95% coverage MIN |
Test temperature of solder:230±5℃ |
||||||||||||||||||||
Humidity |
ΔR≤±(5%R0+0.1Ω) |
Temperature resistance change after 1000 hours exposure in a humidity test chamber controlled at 40±2℃ and 90~95% relative humidity. |
||||||||||||||||||||
Resistance to Soldering Heat |
ΔR≤±(1%R0+0.05Ω) |
Immerge into the 350±10°C tin stove by3.2~4.8
|
||||||||||||||||||||
Nonflammability |
Nonflammable |
Load 5 min according to 5times, 10 times, 16 times rated power and A.C. respectively. |
||||||||||||||||||||
Notes |
More details, please feel free to contact us. |
Derating Curve of Cement Type Resistors SQM:
For resistors operated in ambient temperatures above 70 ℃,power rating must be derated in accordance with the curve below.
Surface Temperature Rise of Cement Type Resistors SQM: