Chip Resistor CS Features: 1.3 Watts power rating in 1 Wart size, 1225 package; 2. Low TCR of ±100ppm/°C; 3.Resistance values from 1m to10hm; 4.High purity alumina substrate for high power dissipation; 5.Long side terminations with higher power rating;
Chip Resistor CS
Products | Chip Resistor CS |
Features | 1.3 Watts power rating in 1 Wart size, 1225 package; 2. Low TCR of ±100ppm/°C; 3.Resistance values from 1m to10hm; 4.High purity alumina substrate for high power dissipation; 5.Long side terminations with higher power rating; |
Dimensions of Chip Resistor CS:
Type | Size(lnch) | L | W | T | D1 | D2 | Weight(g) |
CS01 | 0201 | 0.58±0.05 | 0.29±0.05 | 0.23±0.05 | 0.12±0.05 | 0.15±0.05 | 0.18 |
CS02 | 0402 | 1.000±0.05 | 0.50±0.05 | 0.32±0.10 | 0.25±0.10 | 0.20±0.10 | 0.7 |
CS03 | 0603 | 1.6±0.10 | 0.80±0.10 | 0.45±0.10 | 0.30±0.20 | 0.30±0.20 | 1.99 |
CS05 | 0805 | 2.00±0.15 | 1.25±0.15 | 0.55±0.10 | 0.30±0.20 | 0.40±0.25 | 5.3 |
CS06 | 1206 | 3.05±0.15 | 1.55±0.15 | 0.55±0.10 | 0.50±0.30 | 0.40±0.25 | 8.82 |
CS13 | 1210 | 3.00±0.15 | 2.50±0.15 | 0.55±0.10 | 0.50±0.30 | 0.50±0.25 | 15.5 |
CS10 | 2010 | 5.00±0.20 | 2.45±0.15 | 0.60±0.15 | 0.60±0.30 | 0.50±0.25 | 27.03 |
CS12 | 2512 | 6.35±0.20 | 3.15±0.15 | 0.60±0.10 | 0.60±0.30 | 0.55± 0.25 | 43.08 |
CS12(2W) | 2512(10.000mΩ) | 6.35±0.20 | 3.15±0.15 | 0.74±0.10 | 0.60±0.30 | 0.55±0.25 | 43.08 |
CS12(2W) | 2512(10.000mΩ) | 6.35±0.20 | 3.15+0.15 | 0.74±0.10 | 0.60±0.30 | 2.70±0.10 | 43.08 |
CS25 | 1225 | 3.10±0.15 | 6.30±0.15 | 0.90±0.15 | 0.60±0.30 | 0.55± 0.25 | 53.8 |
CS37 | 3720 | 2.00±0.20 | 3.75±0.20 | 0.60±0.10 | 0.40±0.20 | 0.40±0.20 | 19.96 |
CS75 | 7520 | 2.00±0.20 | 7.50±0.30 | 0.60±0.10 | 0.40±0.20 | 0.40±0.20 | 35.71 |
Applications of Chip Resistor CS:
1.Power Management Applications |
2.Switching Power Supply |
3.Over Current Protection in Audio Applications |
4.Voltage Regulation Module(VRM) |
5.DC-DC Converter Battery Pack, Charger Adaptor |
6.Automitive Engine Control |
7.Disk Driver |
8.Portable Devices(PDA, Cell Phone) |
Environmental Characteristics of Chip Resistor CS:
Item | Repuirement | Test Method |
Temperature Coefficient of Resistance (T.C.R.) | As Sped | +25/-55/+25+125/+25°C |
Short Time Overload | ±0.5% | Rcwv*2.5 or Max. Overload voltage for 5 seconds |
△R土1% for high power rating | ||
Insulation Resisance | >1000MΩ | Apply 100Vdc for 1 minute |
Endusrance | ±1% | 70 ±2°C.Max. Working voltege for1000hrs with 1.5 hrs “ON” and 0.5 hrs “OFF” |
Damp Heat with Load | ±0.5% | 90-95%R.H, Max. Working voltage for 1000 hrs with 1.5 hrs “ON” and 0.5 hrs "OFF" |
Dry Heat | ±0.5% | At+155°C for 1000 hrs |
Bending Strength | As Sped | Bending amplitude 3mm fbr 10 seconds |
Solderability | 95%min, coverage | 245 ± 5°C for 3 seconds |
Resistance to Soldering Heat | ±0.5% | 260 ±5°C fbr 10 seconds |
Dielectric Withstand Voltage | By Type | Apply Max. Overload Voltage fbr I minute |
Themal Shock | ±0.5% | -55°C—150°C, 100 cycles |
Low Temperature Operation | ±0.5% | 1hour, -65°C followed by 45 minutes of RCWV |
Construction of Chip Resistor CS: